+Carton
+ISB
+Peacock
+Sunever
+Teclock
+Well Air
Dial Depth Gauge
Dial Depth Gauge can be used to measure depth and steps of work piece and coating thickness.
5-240mm range (with the supplied extension rods) are available for wide application.
Low measuring force type is also available, which seldom hurts work piece
DM-210
 Needle contact point |
| Model | DM-210 |
| Graduation | 0.01 (mm) |
| Range | 10 (mm) |
| Accuracy | ±12 (µm) |
| Contact point form |
Needle |
| Standard contact point |
ZS-523 |
| Measuring force | 1.4 (N) |
| Weight | 270 (g) |
DM-211
| Ø2 Flat contact point |
| Model | DM-211 |
| Graduation | 0.01 (mm) |
| Range | 10 (mm) |
| Accuracy | ±12 (µm) |
| Contact point form |
Ø2 Flat (mm) |
| Standard contact point |
ZS-530 |
| Measuring force | 1.4 (N) |
| Weight | 270 (g) |
DM-213
| Ø3.2 Ball contact point |
| Model | DM-213 |
| Graduation | 0.01 (mm) |
| Range | 10 (mm) |
| Accuracy | ±12 (µm) |
| Contact point form |
Ø3.2 Ball (mm) |
| Standard contact point |
ZS-034 |
| Measuring force | 1.4 (N) |
| Weight | 270 (g) |
DM-214
| Possible depth measurement of up to 220mm |
| Model | DM-214 |
| Graduation | 0.01 (mm) |
| Range | 10(220) (mm) |
| Accuracy | ±12 (µm) |
| Contact point form |
Ø3.2 Ball (mm) |
| Standard contact point |
ZS-034 |
| Measuring force | 2.5 (N) |
| Weight | 335 (g) |
DM-220
| Needle contact point |
| Model | DM-220 |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Accuracy | ±15 (µm) |
| Contact point form |
Needle |
| Standard contact point |
ZS-534 |
| Measuring force | 2.2 (N) |
| Weight | 300 (g) |
DM-221
| Ø2 Flat contact point |
| Model | DM-221 |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Accuracy | ±15 (µm) |
| Contact point form |
Ø2 Flat (mm) |
| Standard contact point |
ZS-531 |
| Measuring force | 2.2 (N) |
| Weight | 300 (g) |
DM-223
| Ø3.2 Ball contact point |
| Model | DM-223 |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Accuracy | ±15 (µm) |
| Contact point form |
Ø3.2 Ball (mm) |
| Standard contact point |
ZS-034 |
| Measuring force | 2.2 (N) |
| Weight | 275 (g) |
DM-224
| Possible depth measurement of up to 230mm |
| Model | DM-224 |
| Graduation | 0.01 (mm) |
| Range | 20(230) (mm) |
| Accuracy | ±15 (µm) |
| Contact point form |
Ø3.2 Ball (mm) |
| Standard contact point |
ZS-034 |
| Measuring force | 2.5 (N) |
| Weight | 340 (g) |
DM-230
| Needle contact point |
| Model | DM-230 |
| Graduation | 0.01 (mm) |
| Range | 30 (mm) |
| Accuracy | ±35 (µm) |
| Contact point form |
Needle |
| Standard contact point |
ZS-534 |
| Measuring force | 2.5 (N) |
| Weight | 315 (g) |
DM-233
| Possible depth measurement of up to 240mm |
| Model | DM-233 |
| Graduation | 0.01 (mm) |
| Range | 30(240) (mm) |
| Accuracy | ±35 (µm) |
| Contact point form |
Ø3.2 Ball (mm) |
| Standard contact point |
ZS-034 |
| Measuring force | 2.5 (N) |
| Weight | 315 (g) |
DM-234
| Possible depth measurement of up to 240mm |
| Model | DM-234 |
| Graduation | 0.01 (mm) |
| Range | 30(240) (mm) |
| Accuracy | ±35 (µm) |
| Contact point form |
Ø3.2 Ball (mm) |
| Standard contact point |
ZS-034 |
| Measuring force | 2.5 (N) |
| Weight | 355 (g) |
DM-250
| Small type |
| Model | DM-250 |
| Graduation | 0.01 (mm) |
| Range | 5 (mm) |
| Accuracy | ±10 (µm) |
| Contact point form |
Needle |
| Standard contact point |
ZS-518 |
| Measuring force | 1.4 or less (N) |
| Weight | 230 (g) |
DM-295
| Base lenght 150mm |
| Model | DM-295 |
| Graduation | 0.01 (mm) |
| Range | 50 (mm) |
| Accuracy | ±50 (µm) |
| Contact point form |
Ø3.2 Ball (mm) |
| Standard contact point |
ZS-116 |
| Measuring force | 2.5 (N) |
| Weight | 750 (g) |