+Carton
+ISB
+Peacock
+Sunever
+Teclock
+Well Air
Air Ball Lifter
| Withstanding pressure | 0.9 MPa (9.18 kgf/cm2) |
| Working pressure range | 0.05 - 0.6 MPa (0.51 - 6.12 kgf/cm2) |
| Operating temperature range | -5 - 80 °C |
| Using fluid | Air and inert gas (no filling up) |
| Type | Cleanroom: ISR-C General: ISR & ISR-T |
| ISR Series pneumatic Air Ball Lifters have a unique construction - a combination of a high precision-machined ball transfer with an air cylinder. This unique device uses compressed air to lift a load/tool from the table surface position and rotate it in any 360 degree direction in a horizontal plane, an economical and labor saving unit. Roll on - Roll off facility dramatically reduces tool changeover times. |
 Dramatically reduces tool changeover times.Eliminates tool and press bed damage.Allows accurate tool positioning. |
| Calculated lifting capability with combination of selected ball transfers in addition to precision machined enables starting coefficient of friction less than 2 percent even maximum load is applied.For instance when the smoothness of an article bottom in contact with a ball transfer is equivalent to SS400 steel, 200 kg load can be conveyed or rotated only by 4kg force. |
ISR-18T
Large Ball Size = ø5/16" (7.94mm)
T-slot type pneumatic die lifter.
Can be fixed to any press machine
T-slot bolster slot.
ISR-22T
Large Ball Size = ø1/2" (12.7mm)
T-slot type pneumatic die lifter.
Can be fixed to any press machine
T-slot bolster slot.
ISR-28T
Large Ball Size = ø5/8" (15.88mm)
T-slot type pneumatic die lifter.
Can be fixed to any press machine
T-slot bolster slot.