+Carton
+ISB
+Peacock
+Sunever
+Teclock
+Well Air
Long Travel
Dial Gauges are widely used manufacturing plants.
The stem, made of SK quench hardened with strength, is malfunction-free due to fastening.
The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle.
The shock-proof mechanism prevents gears from damage due to shocks arisen by abruptly pushing up the spindle.
The back is increased in strength by four screws, and the lug can be turned 90 degrees in the installation way.
207
 Lug back |
| Model | 207 |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.0 (N) |
207F-T
| Reversed dial |
| Flat back |
| Model | 207F-T |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Reading | ± 100-50-0 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2 (N) |
207F-PL
| Pump type spindle lifting lever |
| Flat back |
| Model | 207F-PL |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.0 (N) |
207S-LL
| Spindle lifting lever (LL-1) |
| Small dial face type (Ø53mm) |
| Lug back |
| Model | 207S-LL |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.0 (N) |
207S
| Small dial face type (Ø53mm) |
| Lug back |
| Model | 207S |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.0 (N) |
207W
| Tow center pointers (The hand is long enough to facilitate easy reading of measured values.) |
| Lug back |
| Model | 207W |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.0 (N) |
207WF-T
| Tow center pointers (The hand is long enough to facilitate easy reading of measured values.) |
| Reversed dial |
| Flat back |
| Model | 207WF-T |
| Graduation | 0.01 (mm) |
| Range | 20 (mm) |
| Reading | ± 100-50-0 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.0 (N) |
307S
| Small dial face type (Ø57mm) |
| Contact point (X-2) |
| Lug back |
| Model | 307S |
| Graduation | 0.01 (mm) |
| Range | 30 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.2 (N) |
307
| Lug back |
| Stem Ø8mm |
| Model | 307 |
| Graduation | 0.01 (mm) |
| Range | 30 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 7 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.2 (N) |
507
| Lug back |
| Stem Ø10mm |
| Model | 507 |
| Graduation | 0.01 (mm) |
| Range | 50 (mm) |
| Reading | ± 0-50-100 |
| Backward error | 9 (µm) |
| Repeatability | 5 (µm) |
| Measuring force less than |
2.5 (N) |
509
| Lug back |
| Stem Ø10mm |
| Model | 509 |
| Graduation | 0.05 (mm) |
| Range | 50 (mm) |
| Reading | ± 0-5-10 |
| Backward error | 10 (µm) |
| Repeatability | 20 (µm) |
| Measuring force less than |
2.5 (N) |
809
| Lug back |
| Stem Ø14mm |
| Model | 809 |
| Graduation | 0.1 (mm) |
| Range | 80 (mm) |
| Reading | ± 0-5-10 |
| Backward error | - (µm) |
| Repeatability | 35 (µm) |
| Measuring force less than |
2.5 (N) |